500-Sheet Drawer (3Tm)-Sensor (Tray 3 Feed-Out) Removal - Lexmark X945e MFP 7510 series Service Manual
Hide thumbs
Also See for X945e MFP 7510 series:
- Specfications (4 pages) ,
- Service manual (815 pages) ,
- Technical reference (403 pages)
Table of Contents
Advertisement
7510
Previous
Next
Go Back
3X 500-sheet drawer (3TM)—sensor (tray 3 feed-out) removal
1. Open the 3TM left door assembly.
2. Remove the two screws securing the two support straps (A) to the machine.
3. Disconnect the connector from the sensor (tray 3 feed-out) (B).
4. Remove the two screws securing bracket (C) to the machine.
5. Remove the bracket (C).
6. Release the hooks securing the sensor (tray 3 feed-out) (B) to the bracket (C).
4-223
Repair information
Advertisement
Table of Contents
Troubleshooting
