500-Sheet Drawer (1Tm)-Sensor (Media Out) Removal - Lexmark X945e MFP 7510 series Service Manual

7510
1X 500-sheet drawer (1TM)—sensor (media out) removal
1. Remove the media feed unit assembly. See
removal (tray 2)" on page
2. Remove the media out actuator. See
page 4-248.
3. Disconnect the connector from the sensor (media out) (A).
4. Release the hooks securing the sensor (media out) (A) to the media feed unit assembly.
5. Remove the sensor (media out) (A).
4-250
Service Manual
"1X 500-sheet drawer (1TM)—media feed unit assembly
4-243.
"1X 500-sheet drawer (1TM)—media out actuator removal" on
Front
Harness
A
Hook
Hooks
Lower view
Previous
Next
Go Back