Switch (Main Power) Removal - Lexmark X945e MFP 7510 series Service Manual

7510

Switch (main power) removal

1. Remove the rear cover assembly. See
2. Remove the right cover assembly. See
3. Remove the top cover assembly. See
4. Detach the metal rod (A) from the switch (main power) (B).
5. Release the two hooks securing the switch (main power) (B) to the machine.
6. Remove the switch (main power) (B).
7. Disconnect the connector from the switch (main power) (B).
8. Disconnect the two large connectors from the switch (main power).
4-82
Service Manual
"Rear cover assembly removal" on page
"Right cover assembly removal" on page
"Top cover assembly removal" on page
A
Large connectors
4-5.
4-4.
4-4.
Connector
B
Previous
Next
Go Back