500-Sheet Drawer (1Tm)-Tray Module Drive Motor Assembly Removal; 500-Sheet Drawer (1Tm)-1Tm Controller Card Assembly Removal - Lexmark X945e MFP 7510 series Service Manual

1X 500-sheet drawer (1TM)—tray module drive motor assembly removal
1. Remove the rear cover. See
2. Disconnect the connector from the tray module drive motor (A).
3. Remove the two screws securing the tray module drive motor (A) to the machine.
4. Remove the tray module drive motor (A).
1X 500-sheet drawer (1TM)—1TM controller card assembly removal
1. Remove the rear cover. See
2. Disconnect the seven connectors from the 1TM controller card assembly (A).
3. Remove the four screws securing the 1TM controller card assembly (A) to the machine.
4. Remove the 1TM controller card assembly (A).
"1X 500-sheet drawer (1TM)—rear cover removal" on page
"1X 500-sheet drawer (1TM)—rear cover removal" on page
A
7510
4-242.
4-242.
4-259
Repair information
Previous
Next
Go Back