Trans Belt Hp Fail Clear; Print The Event Log - Lexmark C935 Service Manual

5057-XXX
Each logged event is identified by the text that appeared when the event occurred. For instance, if the log
recorded a 900 Service Error, the Display Log would show 900 Service RIP Software. Log entries appear in
chronological order.
If additional log entries exist, select
reach the end of the logged entries. To view earlier log entries, select
Select Back to return to the EVENT LOG.

Print the Event Log

Each page of the printed Event Log report has the title Event Log at the top of each page followed by the model
name and serial number. The following is a sample of a printed Event Log:
As the Event Log report prints, Printing EVENT LOG appears on the LCD.
Clear the Event Log
To clear the Event Log:
1. Select Event Log from the Diagnostics Menu.
2. Select Clear Log.
Yes and No appears on the menu. If you select Yes, Deleting EVENT LOG appears on the LCD and erases all
Event Log information, including information from the printed report. Select No to cancel deletion and return to
the EVENT LOG menu, or select Back to exit Clear Log and return to the EVENT LOG menu.

Trans Belt HP Fail Clear

To perform the Trans Belt Fail Clear Test:
1. Select Trans Belt Fail Clear from the Diagnostics Menu.
2. Select Trans Belt HP Fail Clear.
Trans Belt HP Fail Clear Testing.... appears on the LCD.
Press Stop to return to Trans Blet PH Fail Clear.
3-18
Printer Service Manual
to view the next log entries. Continue following this procedure until you
Model and
Serial number
Printer information
Panel display
when error occurred
Page count
Earliest error code
Next error code
.
XXX-XXXX
X854e
Previous
Next
Go Back