Lexmark X945e MFP 7510 series Service Manual page 147

Error code or
Error contents
message
941.00 Switch (media size) size
sensing error (tray 1)
Service tray 1
failure
941.01 sensor (media level) late
error (tray 1)
Service tray 1
failure
942.00 Switch (media size) size
sensing error (tray 2)
Service tray 2
failure
942.01 Sensor (media level) late
error (tray 2)
Service tray 2
failure
943.00 Switch (media size) size
sensing error (tray 3)
Service tray 3
failure
943.01 Sensor (media level) late
error (tray 3)
Service tray 3
failure
944.00 Switch (media size) size
sensing error (tray 4)
Service tray 4
failure
944.01 Sensor (media level) late
error (tray 4)
Service tray 4
failure
Description/Action
The tray 1 switch (media size) detected an invalid
size setting.
Go to "941.00 Switch (media size) size sensing
error (tray 1)" on page 2-185.
The sensing area of the sensor (media level) in the
media tray 1 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to "941.01 Sensor (media level) late error
(tray 1)" on page 2-186.
The tray 2 switch (media size) detected an invalid
size setting.
Go to "942.00 Switch (media size) size sensing
error (tray 2)" on page 2-187.
The sensing area of the sensor (media level) in the
media tray 2 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to "942.01 Sensor (media level) late error
(tray 2)" on page 2-188.
The tray 3 switch (media size) detected an invalid
size setting.
Go to "943.00 Switch (media size) size sensing
error (tray 3)" on page 2-189.
The sensing area of the sensor (media level) in the
media tray 3 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to "943.01 Sensor (media level) late error
(tray 3)" on page 2-190.
The tray 4 switch (media size) detected an invalid
size setting.
Go to "944.00 Switch (media size) size sensing
error (tray 4)" on page 2-191.
The sensing area of the sensor (media level) in the
media tray 4 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to "944.01 Sensor (media level) late error
(tray 4)" on page 2-192.
Diagnostic information
7510
Previous
Next
Go Back
2-31