Communication Error Between Printer And Rip Card Assembly; Communication Error With Finisher Controller Card Assembly - Lexmark X945e MFP 7510 series Service Manual

Step
3 Perform a POR.
Does the error continue when the power is turned off/on?

980.02 Communication error between printer and RIP card assembly

Step
1 Check the RIP card assembly and the printer engine card
assembly for proper connection.
Is the above component properly connected?
2 Perform a POR.
Does the error continue when the power is turned off/on?
3 Perform a POR.
Does the error continue when the power is turned off/on?

980.03 Communication error with finisher controller card assembly

Step
1 Check the finisher controller card assembly and the printer
engine card assembly for proper connection.
Is the above component properly connected?
2 Perform a POR.
Does the error continue when the power is turned off/on?
Check
Check
Check
Yes
Replace the upper Problem solved.
printer engine card
assembly.
Go to "Upper
printer engine
card assembly
removal" on
page 4-88.
Yes
Go to step 2. Replace the
connection.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-84.
Go to step 3.
Replace the upper Problem solved.
printer engine card
assembly.
Go to "Upper
printer engine
card assembly
removal" on
page 4-88.
Yes
Go to step 2. Replace the
connection.
Replace the Problem solved.
finisher controller
card assembly.
Refer to the
Finisher Service
Manual.
Go to step 3.
Diagnostic information
7510
Previous
No
Next
Go Back
No
No
2-199