500-Sheet Drawer (3Tm)-One-Way Clutch / Gear Assembly Removal - Lexmark X945e MFP 7510 series Service Manual

3X 500-sheet drawer (3TM)—one-way clutch / gear assembly removal
1. Remove the media feed unit assembly.
removal (tray 2)" on page 4-222
(tray 3)" on page
2. Remove the harness from the bracket (A).
3. Remove the three screws securing the bracket (A) to the media feed unit assembly.
4. Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5. Remove the tray lift one-way clutch (B).
6. Remove the tray lift one-way gear 24 tooth (C).
Replacement note: Before re-installing, ensure all gears and washers are securely attached to the bracket
(A).
See"3X 500-sheet drawer (3TM)—media feed unit assembly
or "3X 500-sheet drawer (3TM)—media feed unit assembly removal
4-220.
Harness
Clamp
A
Rear
Harness
A
Rear
Washer
B
Washer
C
7510
4-225
Repair information
Previous
Next
Go Back