Cmyk Pc Cartridge Drive Motor Assembly Removal - Lexmark X945e MFP 7510 series Service Manual

7510
9. Remove the CMY developer drive motor assembly (A).

CMYK PC cartridge drive motor assembly removal

Warning: Ensure that all four PC cartridges are concealed from all sources of light, or damage will occur.
1. Remove the four PC cartridges from the machine.
2. Remove the rear cover assembly. See
3. Remove the rear left middle cover. See
4. Remove the rear upper cooling fan bracket assembly. See
removal" on page
5. Remove the developer / transfer roll HVPS card assembly. See
assembly removal" on page
6. Remove the lower printer engine card bracket assembly. See
assembly removal" on page
7. Remove the 5V LVPS card bracket assembly. See
page 4-96.
8. Remove the transfer belt drive motor assembly. See
page 4-93.
9. Remove the duplex unit assembly. See
10. Remove the fuser unit assembly. See
11. Remove the MPF feed unit assembly. See
12. Remove the developer / transfer roll HVPS card assembly. See
assembly removal" on page
4-100
Service Manual
Clamp
Connector
"Rear cover assembly removal" on page
"Rear left middle cover removal" on page
4-111.
4-112.
4-90.
"Duplex unit assembly removal" on page
"Duplex controller card assembly removal" on page
"MPF feed unit assembly removal" on page
4-112.
A
A
"Rear upper cooling fan bracket assembly
"Developer / transfer roll HVPS card
"Lower printer engine card bracket
"5V LVPS card bracket assembly removal" on
"Transfer belt drive motor assembly removal" on
"Developer / transfer roll HVPS card
4-5.
4-6.
4-10.
4-14.
4-8.
Previous
Next
Go Back