Lvps Card Assembly Removal - Lexmark X945e MFP 7510 series Service Manual

6. Release the harnesses from the clamps.
7. Remove the four screws securing the 5V LVPS card bracket assembly (A) to the machine.
8. Remove the 5V LVPS card bracket assembly (A).
5V LVPS card assembly removal
1. Remove the rear cover assembly. See
2. Remove the rear upper cooling fan bracket assembly. See
removal" on page
3. Remove the developer / transfer roll HVPS card assembly. See
assembly removal" on page
4. Remove the lower printer engine card bracket assembly. See
assembly removal" on page
5. Remove the 5V HVPS card bracket assembly. See
page 4-96.
6. Remove the four screws securing appropriate 5V LVPS card assembly (A) to the 5V HVPS card bracket
assembly.
"Rear cover assembly removal" on page
4-111.
4-112.
4-90.
"Rear upper cooling fan bracket assembly
"Developer / transfer roll HVPS card
"Lower printer engine card bracket
"5V LVPS card bracket assembly removal" on
7510
4-5.
4-97
Repair information
Previous
Next
Go Back