7510
6. Remove the charge roll HVPS card assembly (A).
MPF / transport drive motor assembly removal
1. Remove the rear cover assembly. See
2. Remove the rear upper cooling fan bracket assembly. See
removal" on page
3. Remove the developer / transfer roll HVPS card assembly. See
assembly removal" on page
4. Remove the rear left middle cover. See
5. Remove the 24V LVPS card bracket assembly. See
page
4-95.
6. Remove the CMYK transfer HVPS card assembly. See
on page
4-103.
7. Disconnect the connector from the MPF transport drive motor assembly (A).
8. Remove the three screws securing the MPF/transport drive motor assembly (A) to the machine.
4-114
Service Manual
"Rear cover assembly removal" on page
4-111.
4-112.
"Rear left middle cover removal" on page
A
Hooks
"Rear upper cooling fan bracket assembly
"Developer / transfer roll HVPS card
"24V LVPS card bracket assembly removal" on
"CMYK transfer HVPS card assembly removal"
4-5.
4-6.
Previous
Next
Go Back