Replacement warning: Ensure that all PC cartridge units are properly seated and aligned before raising
the transfer belt lift handle to its upper-most position, or damage will occur. Never force the transfer belt lift
handle into its home position, or damage will occur.
Image density sensor assembly removal
1. Remove the printer front door assembly. See
2. Remove the front left cover. See
3. Remove the waste toner cartridge cover. See
4. Remove the waste toner cartridge sensor assembly. See
removal" on page
5. Remove the inner cover. See
6. Remove the waste toner agitator motor assembly. See
on page
4-54.
7. Remove the screw securing the harness access cover (A) to the machine.
A
Button
B
"Printer front door assembly removal" on page
"Front left cover removal" on page
"Waste toner cartridge cover removal" on page
4-49.
"Inner cover removal" on page
4-9.
"Waste toner cartridge sensor assembly
4-53.
"Waste toner agitator motor assembly removal"
Repair information
7510
Previous
Next
Go Back
4-3.
4-49.
4-55