Rip Card Access Cover Removal; Rip Card Assembly Removal - Lexmark X945e MFP 7510 series Service Manual

7510

RIP card access cover removal

1. Using your finger, lift the RIP card access cover (A) by the notch.
2. Remove the RIP card access cover (A).

RIP card assembly removal

1. Remove the two screws securing the RIP card assembly (A) to the machine.
2. Pull the two knurled thumb screws to remove the RIP card assembly (A) from the machine.
3. Remove the RIP card assembly (A) from the machine.
4-84
Service Manual
Previous
Next
Go Back