Switch (Sheet Through) Static Jam - Lexmark X945e MFP 7510 series Service Manual

7510
Step
10 Check the MPF/transport drive motor for proper connection.
Is the above component properly connected?
11 Perform a print test.
Does the error continue?

290.00 Switch (sheet through) static jam

Step
1 Check the media path.
Is the media path free of media or media fragments?
2 Check the sensor (sheet through) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SCANNER TESTS.
3. Touch Sensor Tests.
4. Touch Sheet through.
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
3 Check the sensor (sheet through) for proper connection.
Is the above component properly connected?
4 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
5 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
2-66
Service Manual
Check
Check
Yes
Replace the MPF/ Replace the
transport drive connection.
motor .
Go to "MPF /
transport drive
motor assembly
removal" on
page 4-114.
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-91.
Yes
Go to step 2. Remove any
media or media
fragments.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (sheet connection.
through).
Go to "Sensor
(sheet through)
removal" on
page 4-165.
Replace the ADF Problem solved.
controller card
assembly.
Go to "ADF
controller card
assembly
removal" on
page 4-145.
Go to step 5.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-84.
Previous
No
Next
Go Back
No