Transfer Belt Lift Latch Assembly Removal - Lexmark X945e MFP 7510 series Service Manual

event that the PC unit assembly (C) becomes bound, it can be removed by twisting it in a clockwise
direction while pulling it from the machine.

Transfer belt lift latch assembly removal

1. Remove the printer front door assembly. See
2. Remove the front left cover. See
3. Remove the waste toner cartridge cover. See
4. Remove the waste toner cartridge sensor assembly. See
removal" on page
5. Remove the sensor (waste toner cartridge full). See
page 4-50.
6. Remove the inner cover. See
7. Remove the two screws securing the transfer belt lift latch (A) to the machine.
8. Release the harnesses from the clamp.
Metal
track
Rail must slide straight
into metal track
C
"Printer front door assembly removal" on page
"Front left cover removal" on page
"Waste toner cartridge cover removal" on page
4-49.
"Inner cover removal" on page
A
1
4-9.
"Waste toner cartridge sensor assembly
"Sensor (waste toner cartridge full) removal" on
4-53.
7510
4-3.
4-49.
4-73
Repair information
Previous
Next
Go Back