Lvps Cooling Fan Removal - Lexmark X945e MFP 7510 series Service Manual

7510
7. Remove the appropriate 5V LVPS card assembly (A).
24V LVPS cooling fan removal
1. Remove the rear cover assembly. See
2. Remove the rear upper cooling fan bracket assembly. See
removal" on page
3. Remove the rear left middle cover. See
4. Remove the 24V LVPS card bracket assembly. See
page 4-95.
5. Disconnect the connector from the 24V LVPS cooling fan (A).
6. Remove the two screws securing the 24V LVPS cooling fan (A) to the 24V LVPS card bracket assembly (B).
7. Remove the 24V LVPS cooling fan (A).
Replacement warning: When replacing the 24V LVPS cooling fan (A), ensure that the label is facing up.
4-98
Service Manual
"Rear cover assembly removal" on page
4-111.
"Rear left middle cover removal" on page
Connector
A
"Rear upper cooling fan bracket assembly
"24V LVPS card bracket assembly removal" on
4-5.
4-6.
Previous
Next
Go Back