Ccd Error - Lexmark X945e MFP 7510 series Service Manual

7510
Step
4 Check the exposure lamp for operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Scanner Motor Tests.
4. Touch Exposure lamp.
Does the exposure lamp operate properly?
5 Check the exposure lamp for connection.
Is the above component properly connected?
6 Check the exposure lamp PS card assembly.
Is the above card properly connected to the scanner
controller card assembly?
7 Check the scanner PS card assembly for connection.
Is the above card connected properly?
8 Perform a POR.
Does the error continue when the power is turned off/on?

845.00 CCD error

Step
1 Check the CCD/lens assembly connection.
Is the CCD/lens assembly connected properly?
2 Check all the connections on the scanner controller card
assembly.
Are all the connections connected properly?
2-124
Service Manual
Check
Caution: When performing motor tests, ensure
that all cover and door interlock switches are
overridden.
Check
Yes No
Go to step 8. Go to step 5.
Replace the Replace the
exposure lamp. connection.
Go to
"Exposure lamp
removal" on
page 4-129.
Replace the Replace the
exposure lamp connection.
PS card
assembly.
"Exposure lamp
PS card
assembly
removal" on
page 4-129.
Replace the Replace the
scanner PS card connection.
assembly.
Go to "Scanner
PS card
assembly
removal" on
page 4-133.
Replace the Problem solved.
scanner
controller card
assembly.
Go to "Scanner
controller card
assembly
removal" on
page 4-130.
Yes No
Go to step 2. Replace the
connection.
Replace the Replace the
CCD/lens connection.
assembly.
Previous
Next
Go Back