9. Gently flex the standard media exit bin full actuator (C) to detach it from the machine.
10. Remove the standard media exit bin full actuator (C) from the machine.
Switch (printer left door interlock) removal
1. Remove the rear cover assembly. See
Warning: Ensure that the rear left middle cover is removed before removing the rear left upper cover, or
damage will occur.
2. Remove the rear left middle cover. See
3. Remove the rear left upper cover. See
A
B
B
C
"Rear cover assembly removal" on page
"Rear left middle cover removal" on page
"Rear left upper cover removal" on page
7510
4-5.
4-6.
4-7.
4-29
Repair information
Previous
Next
Go Back