Lexmark X945e MFP 7510 series Service Manual page 712

7510
Step
5 The transfer belt alignment must be correct on both sides
for proper operation. The top of the transfer belt (E) and
the top of the right side cover (F) must be parallel, as
shown in the following image.
E
F
The metal edge at the top of the registration frame
assembly (G) must be parallel to the top of the transfer
belt (H), as shown in the following image:
G
H
Is the transfer belt alignment correct?
4-280
Service Manual
Check Yes No
Go to next step. Replace the
appropriate
assembly. See
xxx, xxx, or xxx.
Previous
Next
Go Back