Standard Media Exit Roll Assembly; Sensor (Standard Bin Full); Standard Media Exit Shift Motor; Duplex Diverter Gate - Lexmark X945e MFP 7510 series Service Manual

7510

Standard media exit roll assembly

The media exit roll assembly feeds printed media from the fuser to the standard bin.

Sensor (standard bin full)

The sensor (standard bin full) detects whether the standard bin is full by moving the actuator up and down.

Standard media exit shift motor

The standard media exit shift motor allows the standard media exit roll assembly to shift back and forth to perform
off-set sorting.

Duplex diverter gate

The duplex diverter gate switches the media transport path. When the duplex diverter gate is lifted, media is fed
to the standard bin. When it is lowered, media is fed to the duplex.
Inverter
reverse
clutch
Duplex
diverter gate
Duplex

drive

motor
Duplex media
transport roll assembly
Drive

K developer/transport drive motor assembly

The K developer/transport drive motor is a DC motor that drives the K developer unit assembly, registration roll,
2nd transfer roll, fuser and standard media exit rolls.

MPF/transport drive motor

1-20
Service Manual
Inverter
forward
clutch
Standard media exit
roll assembly
Duplex diverter
solenoid
Switch (duplex left
door interlock)
Sensor
(duplex wait)
Previous
Next
Go Back