Lexmark X945e MFP 7510 series Service Manual page 131

Error code or
Error contents
message
250.00 Sensor (registration) late jam
(feeding from the MPF)
Paper jam
280.00 Sensor (bridge unit media
entrance) late jam
Paper jam
280.01 Sensor (bridge unit media
entrance) static jam
Paper jam
281.00 Sensor (bridge unit media
exit) late jam
Paper jam
281.03 Sensor (bridge unit media
exit) static jam
Paper jam
281.04 Sensor (bridge unit exit bin)
late jam.
Paper jam
281.05 Sensor (bridge unit exit bin)
lag jam.
Paper jam
281.06 Sensor (bridge unit exit bin)
static jam.
Paper jam
282.00 Sensor (finisher media
entrance) late jam
Paper jam
282.01 Sensor (finisher media
entrance) static jam
Paper jam
283.00 Sensor (buffer path) late jam
Paper jam
283.03 Sensor (buffer path) static
jam
Paper jam
284.00 Sensor (lower media exit) late
jam
Paper jam
Description/Action
The media is late reaching the sensor (registration)
within the specified time after the MPF pick solenoid
is turned on.
Go to "250.00 Sensor (registration) late jam
(feeding from the MPF)" on page
The media is late reaching the sensor (bridge unit
media entrance) within the specified time after
reaching the sensor (fuser exit).
Refer to the Finisher Service Manual.
Media remains on the sensor (bridge unit media
entrance).
Refer to the Finisher Service Manual.
The media is late reaching the sensor (bridge unit
media exit) within the specified time after reaching
the sensor (bridge unit media entrance).
Refer to the Finisher Service Manual.
Media remains on the sensor (bridge unit media
exit).
Refer to the Finisher Service Manual.
Sensor (bridge unit exit bin) is not turned on within
the specified time after the sensor (bridge unit
media entrance) is turned on.
Refer to the Finisher Service Manual.
Sensor (bridge unit exit bin) is not turned off within
the specified time after the sensor (bridge unit exit
bin) is turned on.
Refer to Finisher Service Manual.
Paper remains on the sensor (bridge unit exit bin).
Refer to the Finisher Service Manual.
The media is late reaching the sensor (finisher
media entrance) within the specified time after
reaching the sensor (bridge unit media exit).
Refer to the Finisher Service Manual.
Paper remains on the sensor (finisher media
entrance).
Refer to the Finisher Service Manual.
The media is late reaching the sensor (buffer path)
within the specified time after reaching the sensor
(finisher media entrance).
Refer to the Finisher Service Manual.
Paper remains on the sensor (finisher buffer path).
Refer to the Finisher Service Manual.
The media is late reaching the sensor (lower media
exit) within the specified time after reaching the
sensor (buffer path).
Refer to the Finisher Service Manual.
Diagnostic information
7510
Previous
Next
2-64.
Go Back
2-15