Lexmark X945e MFP 7510 series Service Manual page 493
Hide thumbs
Also See for X945e MFP 7510 series:
- Specfications (4 pages) ,
- Service manual (815 pages) ,
- Technical reference (403 pages)
Table of Contents
Advertisement
13. While holding the four developer unit assemblies firmly inside the machine, gently remove the developer
interlock plate assembly (A).
14. Remove the developer interlock plate assembly (A) and allow it to gently hang down by the harness if
removing the developer units. If removing the developer interlock plate assembly (A) from the machine,
goes to step 15.
15. Remove the screw securing the harness cover (B) to the machine.
16. Remove the harness cover (B).
17. Disconnect the connector from the developer interlock plate assembly (A).
7510
4-61
Repair information
Previous
Next
Go Back
Advertisement
Table of Contents
Troubleshooting
