Sensor (Media Level) Late Error (Tray 2) - Lexmark X945e MFP 7510 series Service Manual

7510
Step
4 Check the tray 2 switch (media size) for proper connection.
Is the above component properly connected?
5 Perform a POR.
Does the error continue when the power is turned off/on?

942.01 Sensor (media level) late error (tray 2)

Step
1 Check the media.
Is media loaded in tray 2 properly?
2 Check the sensor (media level) (tray 2) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch INPUT TRAY TESTS.
3. Touch Sensor Test.
4. Touch Tray 2.
5. Touch Media level.
Does the display on the operator panel, change every time
the media tray is opened and closed?
3 Check the sensor (media level) (tray 2) for proper
connection.
Is the above component properly connected?
4
Check the media feed/lift motor (tray 2) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Tray 2 media feed/lift motor.
Warning: The media tray must be opened before performing
this test or paper jam may occur.
Does the above component operate properly?
2-188
Service Manual
Check
Check
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Yes
Replace the switch Replace the
(media size). connection.
Go to "Switch
(media size)
removal" on
page 4-121.
Replace the upper Problem solved.
printer engine card
assembly.
Go to "Upper
printer engine
card assembly
removal" on
page 4-88.
Yes
Go to step 2. Load media
properly.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (media connection.
level).
Go to "Sensor
(media level)
removal" on
page 4-34.
Go to step 6. Go to step 5.
Previous
No
Next
Go Back
No