2000-Sheet Dual Input (Ttm)-Tray Support Roll Removal - Lexmark X945e MFP 7510 series Service Manual

7. Remove the caster (A).
2000-sheet dual input (TTM)—tray support roll removal
1. Remove the tray module left cover. See
on page 4-174.
2. Remove TTM media tray 3 assembly. See
removal" on page
3. Remove media tray 4 assembly. See
removal" on page
4. Remove the foot cover. See
5. Remove the two screws securing the two brackets (A).
6. Remove the two E-clips securing the tray support rolls (B) to the two brackets (A) using a prying tool.
7. Remove the two E-clips securing the tray support rolls (B) to the main frame (C).
"2000-sheet dual input (TTM)— tray module left cover removal"
"2000-sheet dual input (TTM)—TTM media tray 3 assembly
4-178.
"2000-sheet dual input (TTM)—TTM media tray 4 assembly
4-177.
"2000-sheet dual input (TTM)—foot cover removal" on page
Front
B
D
E-clip
A
7510
4-172.
4-175
Repair information
Previous
Next
Go Back