500-Sheet Drawer (3Tm)-Sensor (Tray 4 Feed-Out) Removal - Lexmark X945e MFP 7510 series Service Manual

7510
3X 500-sheet drawer (3TM)—sensor (tray 4 feed-out) removal
Previous
1. Open the 3TM left door assembly.
2. Remove the two screws securing the two support straps (A) to the machine.
3. Disconnect the connector from the sensor (tray 4 feed-out) (B).
4. Remove the two screws securing bracket (C) to the machine.
Next
5. Remove the bracket (C).
6. Release the hooks securing the sensor (tray 4 feed-out) (B) to the bracket (C).
7. Remove the sensor (tray 4 feed-out) (B).
Go Back
4-217
Repair information