Lexmark X945e MFP 7510 series Service Manual page 264

7510
Step
8 Check that the transfer belt steering mechanism lock
packaging was fully removed. If not removed before the
transfer belt lever is lowered, the transfer belt steering
mechanism lock might break and remain inside the machine
in the area, as showing in the following image (A).
The following images show the transfer belt steering
mechanism lock.
Are there any remnants from the packaging?
2-148
Service Manual
Check Yes
Remove any Go to the next
packaging step.
remnants.
If the problem
persists, go to the
next step.
Previous
No
Next
Go Back