2000-Sheet Dual Input (Ttm)-Sensor (Tray 4 Feed-Out) Removal - Lexmark X945e MFP 7510 series Service Manual

7510
2000-sheet dual input (TTM)—sensor (tray 4 feed-out) removal
1. Remove the media tray 2 assembly.
2. Remove the tray module left cover. See
on page 4-174.
3. Remove the TTM media tray 3 assembly. See
assembly removal" on page
4. Remove the TTM media tray 4 assembly. See
assembly removal" on page
5. Disconnect the connector from the sensor (tray 4 feed-out) (A).
6. Release the hooks securing the sensor (tray 4 feed-out) (A) to the upper guide (B).
7. Remove the sensor (tray 4 feed-out) (A).
4-188
Service Manual
"2000-sheet dual input (TTM)— tray module left cover removal"
"2000-sheet dual input (TTM)—TTM media tray 3
4-178.
"2000-sheet dual input (TTM)—TTM media tray 4
4-177.
Connector
A
Hook
Front
B
Previous
Next
Go Back