IDK MSD-804FD Series Command Manual page 75

@SSP Set speaker configuration
Command @SSP, ch, number (, speaker_1, speaker_2
format
Return value
@SSP, ch, number (, speaker_1, speaker_2
format
Parameter ch : Input channel
0 = All digital inputs, 1 = IN1 to 5 = IN5
number : Speakers
1 to 8 [Default]: 2
speaker_1-8 : Speakers to be used
0 = Front Left/Right [Default], 1 = Low Frequency Effect,
2 = Front Center, 3 = Rear Left/Right, 4 = Rear Center,
5 = Front Left/Right Center, 6 = Rear Left/Right Center,
7 = Front Left/Right Wide, 8 = Front Left/Right High,
9 = Top Center, 10 = Front Center High
If pretermitting speaker_1-8, settings are done according to the settings
of "number"
number
1
2
3
4
5
6
7
8
If you specify speaker_1-8 and the number and total number of speakers
(speaker_1-8) do not match, the number is set automatically. In case the number
exceeds the settable range, an error is replied.
Example Send
Receive
Send
Receive
Send
Receive
Related info. 8.9.6 Speaker configuration
speaker
0 1 2 3
OFF
OFF OFF O N
OFF
O N OFF OFF
OFF
O N O N OFF
OFF
O N O N O N
O N
O N O N OFF
O N
O N O N O N
O N
O N O N O N
O N
O N O N O N
@SSP,1,8
@SSP,1,8
@SSP,2,6,0,1,2,3
@SSP,2,6,0,1,2,3
@SSP,3,8,0,3,5,6,7
@ERR,1
75
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
4 5 6 7
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
O N OFF OFF OFF
OFF OFF O N OFF
Set the number of speakers of IN1 to 8. (The
speakers are configured as shown in
number=8 of the chart above.)
Terminated normally.
Set IN2 to use 6 speakers as follows:
Front Left/Right, Low Frequency Effect, Front
Center, Rear Left/Right
Terminated normally.
Set IN3 to use following speakers;
Front Left/Right, Rear Left/Right, Front
Left/Right Center, Rear Left/Right Center,
Front Left/Right Wide
The total number of speakers is 10, which
exceeds the limit of settable value.
8 9 10
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF