IDK MSD-804FD Series Command Manual page 56

@SVO Set video output connector
Command @SVO, ch, out1A (, ch_2, out2A
format
Return value
@SVO, ch, out1A (, ch_2, out2A
format
Parameter ch_1-8 : Output
0 = All outputs, 1 = OUT1A to 4 = OUT4A, 5 = OUT1B to 8 = OUT4B
outA1-4 : Each connector's video output of OUTA
outB1-4 : Each connector's video output of OUTB
0 = Not output, 1 = Output [Default]
Example Send
Receive
Send
Receive
Related info. 8.7.8 Video output connector
@GVO Get video output connector
@GVO
Command
format
Return value @GVO, outA_1(, outA_2, outA_3, outA_4, outB_1, outB_2, outB_3, outB_4)
format
Parameter outA1-4 : Each vidieo output of OUTA connector
outB1-4 : Each vidieo output of OUTB connector
0 = Not output, 1 = Output [Default]
Example Send
Receive
Send
Receive
Related info. 8.7.8 Video output connector
@SEN Set HDCP output mode
Command @SEN, ch_1, hdcp_1 (, ch_2, hdcp_2
format
Return value
@SEN, ch_1, hdcp_1 (, ch_2, hdcp_2
format
Parameter ch_1-8 : Output
0 = All outputs, 1 = OUT1A to 4 = OUT4A, 5 = OUT1B to 8 = OUT4B*
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
hdcp_1-8 : HDCP output
0 = HDCP is output only if input signals are HDCP compliant (HDCP INPUT
ONLY),
1 = HDCP is always output (ALWAYS [Default]),
2 = HDCP is not authorized (DISABLE)
Example Send
Receive
Related info. 8.7.9 HDCP output
･･･
)
･･･
)
@SVO,1,1
@SVO,1,1
@SVO,1,1
@ERR,15
@GVO
@GVO,1,1,1,0,1,1,0,1
@GVO
@ERR,15
OUT1: Send "ALWAYS".
@SEN,1,1
Terminated normally.
@SEN,1,1
56
MSD-804FD Users Guide (Command Guide)
OUT1A connector outputs video.
Terminated normally.
Can be set only if Cat5e/Cat6 output
option is installed.
Get HDCP output.
OUT4A and OUT3B: Not output video;
other outputs: output video.
Can be set only if Cat5e/Cat6 output
option is installed.
･･･
)
･･･
)