IDK MSD-804FD Series Command Manual page 82

@SGW Set LAN gateway address
Command @SGW, unit_1, unit_2, unit_3, unit_4
format
@SGW, unit_1, unit_2, unit_3, unit_4
Return value
format
Parameter unit_1 : Upper bti of the gateway address to unit_4 : Lower bit of the gateway
address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.201
Example Send
Receive
Related info. 8.11.3 Gateway address
Note After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.
@GGW Get LAN gateway address
Command @GGW
format
Return value @GGW, unit_1, unit_2, unit_3, unit_4
format
Parameter unit_1 : Upper bit of the gateway address to unit_4 : Lower bit of the gateway
address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.201
Example Send
Receive
Related info. 8.11.3 Gateway address
@SBG Set OUTB gateway address
@SBG, unit_1, unit_2, unit_3, unit_4
Command
format
Return value @SBG, unit_1, unit_2, unit_3, unit_4
format
Parameter unit_1 : Upper bit of the OUTB gateway address to unit_4 : Lower bit of the OUTB
gateway address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.201
Can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
Related info. 8.11.3 Gateway address
Note After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.
@SGW,192,168,1,254
@SGW,192,168,1,254
@GGW
@GGW,192,168,1,254
@SBG,192,168,1,254
@SBG,192,168,1,254
82
MSD-804FD Users Guide (Command Guide)
Set LAN gateway address to
"192.168.1.254".
Terminated normally.
Get LAN gateway address
Gat LAN gateway address:"192.168.1.254"
Set OUTB gateway address to
"192.168.1.254".
Terminated normally.