IDK MSD-804FD Series Command Manual page 59

@GDC Get Deep Color
Command @GDC
format
Return value @GDC, outA_1 (, outA_2, outA_3, outA_4, outB_1, outB_2, outB_3, outB_4)
format
Parameter outA_1-4 : Color depth of OUTA's each output
outB_1-4 : Color depth of OUTA's each output *
0 = 24-BIT COLOR [Default], 1 = 30-BIT COLOR
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
Related info. 8.7.11 Deep Color
@SCE Set CEC
Command @SCE, ch_1, connect_1 (, ch_2, connect_2
format
Return value @SCE, ch_1, connect_1 (, ch_2, connect_2
format
Parameter ch_1-8 : Output
0 = All outputs, 1 = OUT1A to 4 = OUT4A, 5 = OUT1B to 8 = OUT4B*
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
connect_1-4 : CEC connection
0 = Not connected [Default],
2 = IN1, 3 = IN2, 4 = IN3,
7 = IN6, 8 = IN7, 9 = IN8
Example Send
Receive
Related info. 8.7.12 CEC (Consumer Electronics Control)
@GCE Get CEC
@GCE
Command
format
Return value @GCE, outA_1 (, outA_2, outA_3, outA_4, outB_1, outB_2, outB_3, outB_4)
format
Parameter outA_1-4 : CEC connection of OUTA's each output
outB_1-4 : CEC connection of OUTA's each output *
0 = Not connected [Default],
2 = IN1, 3 = IN2, 4 = IN3,
7 = IN6, 8 = IN7, 9 = IN8
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
Related info. 8.7.12 CEC (Consumer Electronics Control)
Get output color depth.
@GDC
@GDC,1,1,0,1,1, OUT3A: 24-BIT COLOR; other outputs: 30-BIT
1,1,1 COLOR
@SCE,1,4
CEC of OUT1: Connect with IN3.
@SCE,1,4 Terminated normally.
@GCE Get CEC connection.
@GCE,4,0,0,0
OUT1A: Connect to IN3; other outputs: Not
connected
59
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
1 =Selected video input channel,
5 = IN4, 6 = IN5
1 =Selected input video channel,
5 = IN4, 6 = IN5