IDK MSD-804FD Series Command Manual page 107

@STF Set flash time (Command keys and DISPLAY POWER keys)
Command @STF, switch_1, flash_1 (, switch_2, flash_2
format
Return value
@STF, switch_1, flash_1 (, switch_2, flash_2
format
Parameter switch_1-9 : key type
0 = All keys, 1 to 5 = COMMAND A to E,
6 to 9 = DISPLAY1 POWER to DISPLAY4 POWER
flash_1-9 : Flash time
-1 = Flash during command execution, 0 = Not flash,
1 to 1000 = Flash for the specified time (range: 1 to 1000 seconds)
[Default]: If COMMANDs A to I: 0 (Not flash),
Example Send
Receive
Related info. 8.12.8 Flash time (Command keys and DISPLAY POWER keys)
@GTF Get flash time (Command keys and DISPLAY POWER keys)
Command @GTF, switch_1 (, switch_2
format
Return value @GTF, switch_1, flash_1 (, switch_2, flash_2
format
Parameter switch_1-9 : key type
0 = All keys, 1 to 5 = COMMAND A to E,
6 to 9 = DISPLAY1 POWER to DISPLAY4 POWER
flash_1-9 : Flash time
-1 = Flash during command execution, 0 = Not flash,
1 to 1000 = Flash for the specified time (range: 1 to 1000 seconds)
[Default]: If COMMANDs A to I: 0 (Not flash),
Example Send
Receive
Related info. 8.12.8 Flash time (Command keys and DISPLAY POWER keys)
If DISPLAYn POWER: -1 (Flash during command execution)
@STF,4,5 COMMAND D flashes for 5 seconds after command
execution starts.
@STF,4,5
Terminated normally.
･･･
)
If DISPLAYn POWER: -1 (Flash during command execution)
@GTF,9 Get flash time of DISPLAY4 POWER.
@GTF,9,-1
Flashes during command execution.
107
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
･･･
)