IDK MSD-804FD Series Command Manual page 48

@SHD Set horizontal display period
Command @SHD, ch, h_disp
format
Return value @SHD, ch, h_disp
format
Parameter ch : Input channel
0 = All inputs, 1 = IN1 to 8 = IN8
h_disp : Horizontal display period
64 to 2900 ([The total number of horizontal dots - 64] or less)
[Default]: Differs depending on input signals
Example Send
Receive
Send
Receive
Related info. 8.6.3 Horizontal display period
Note This command is valid only if signals are input.
@GHD Get horizontal display period
@GHD
Command
format
Return value @GHD, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8
format
Parameter in_1-8 : Horizontal display of each input channel
64 to 2900 ([The total number of horizontal dots - 64] or less)
[Default]: Differs depending on input signals
Example Send
Receive
Related info. 8.6.3 Horizontal display period
@SVS Set vertical start position
Command @SVS, ch, v_start
format
Return value @SVS, ch, v_start
format
Parameter ch : Input channel
0 = All inputs, 1 = IN1 to 8 = IN8
v_start : Vertical starting position
10 to 2048 ([The total number of vertical lines - Vertical display period] or less)
[Default]: Differs depending on input signals
Example Send
Receive
Send
Receive
Related info. 8.6.4 Vertical start position
Note This command is valid only if signals are input.
@SHD,5,1024
Set horizontal display period of IN5 to 1024.
@SHD,5,1024
Terminated normally.
@SHD,6,1024
@ERR,3 If no signal is input , an error is replied.
@GHD
@GHD,1920,1920,0,1920,
1024,1360,0,1360,0
@SVS,5,35
@SVS,5,35
@SVS,6,35
@ERR,3
48
MSD-804FD Users Guide (Command Guide)
Get horizontal display lines.
0 is replied to channels without input
signals.
Set vertical starting position of IN5 to 35.
Terminated normally.
If no signal is input , an error is replied.