IDK MSD-804FD Series Command Manual page 54

@GFF Get video switching effect
Command @GFF
format
Return value @GFF, out_1 (, out_2, out_3, out_4 )
format
Parameter out_1-4 : Video switching effect of each output
0 = CUT, 1 = FADE OUT/IN,
2 = FREEZE + FADE OUT/IN [Default],
3 = LEFT→RIGHT WIPE, 4 = RIGHT→LEFT WIPE, 5 = TOP→BOTTOM
WIPE, 6 = BOTTOM→TOP WIPE
Example Send
Receive
Related info. 8.7.5 Video switching effects
@SFT Set video switching speed
Command @SFT, ch_1, time_1 (, ch_2, time_2
format
Return value @SFT, ch_1, time_1 (, ch_2, time_2
format
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
time_1-4 : Switching speed
100 = 0.1 seconds to 2000 = 2 Seconds [Default] 350 = 0.35 Seconds
Set the value by 10 ms. If you set a value other than 0 for the lower 1 digits, these
values will be rounded down. (For example, if you set it to 395, the speed is set to
390 ms.)
Example Send
Receive
Related info. 8.7.6 Switching speed
@GFF
Get video switching effects when input channels are
switched.
@GFF,1,1,0,1 Input channels are switched by:
OUT3: "CUT"; other outputs: "FADE OUT/IN" or
"DISSOLVE".
@SFT,1,400 Switching speed of OUT1 is 400 ms.
@SFT,1,400 Terminated normally.
54
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)