IDK MSD-804FD Series Command Manual page 19

@SUP Set execution plane at starting up
@GUP Get execution plane at starting up
@SIT Set ineffective time during control command
@GIT Get ineffective time during control command
@DEC Initialize registered command and association
@STL Set command key lighting
@GTL Get command key lighting
@STF Set flash time (Command keys and DISPLAY POWER keys)
@GTF Get flash time (Command keys and DISPLAY POWER keys)
Preset memory
Command Feature
@RCM Load video and audio channel setting from cross point memory
@SCM Overwrite video and audio channel setting in cross point memory
@SEM Save video and audio channel setting in cross point memory
@ECM Edit video and audio channel setting in cross point memory
@GCM Get video and audio channel setting in cross point memory
@RCV Load video channel setting from cross point memory
@SCV Overwrite video channel setting in cross point memory
@SEV Saving video channel setting in cross point memory
@ECV Edit video channel setting in cross point memory
@GCV Get video channel setting in cross point memory
@RCA Load audio channel setting from cross point memory
@SCA Overwrite audio channel setting in cross point memory
@SEA Save audio channel setting in cross point memory
@ECA Edit audio channel setting in cross point memory
@GCA Get audio channel setting in cross point memory
@RPM Load all settings from preset memory
@SPM Save all settings in preset memory
@SMU Set startup setting
@GMU Get startup setting
MSD-804FD Users Guide (Command Guide)
19