IDK MSD-804FD Series Command Manual page 42

@GSU Get black level
Command @GSU
format
Return value @GSU, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8, in_9
format
Parameter in_1-9 : Input setup level of each input channel
-20 = -20×0.5 (-10.0 %) to +20 = +20×0.5 (+10.0 %) [Default]: ±0 = ±0.0 %
Example Send
Receive
Related info. 8.4.5 Black level
@IDC Input default color
Command @IDC, ch_1 (, ch_2
format
Return value @IDC, ch_1 (, ch_2
format
Parameter ch_1-9 : Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
Example Send
Receive
Related info. 8.4.6 Input default color
@SOB Set output brightness
Command @SOB, ch_1, bright_1 (, ch_2, bright_2
format
Return value @SOB, ch_1, bright_1 (, ch_2, bright_2
format
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
bright_1-4 : Output brightness
80 to 120 [Default]: 100
Example Send
Receive
Related info. 8.4.7 Output brightness
@GOB Get output brightness
Command @GOB
format
@GOB, out_1 (, out_2 , out_3 , out_4)
Return value
format
Parameter out_1-4 : Output brightness of each output
80 to 120 [Default]: 100
Example Send
Receive
Related info. 8.4.7 Output brightness
@GSU
@GSU,0,0,0,0,15,0,0,0,0
･･･
)
･･･
)
@IDC,1
Initialize the following settings of IN1:
@SBR Set input brightness (P. 39), @SCO Set input
contrast (P. 39), @SHU Set hue (P. 40), @SST Set
saturation (P. 41), and @SSU Set black level (P. 41)
@IDC,1
Terminated normally.
@SOB,1,110
@SOB,1,110
@GOB
@GOB,110,100,100,100
42
MSD-804FD Users Guide (Command Guide)
Get input setup level
IN5: +7.5%; other inputs: 0%.
･･･
)
･･･
)
Set output brightness of OUT1 to 110%.
Terminated normally.
Get output brightness.
OUT1: 110%; other outputs: 100%.