Input Settings - IDK MSD-804FD Series Command Manual

3.3.6 Input settings

@SDT Set no-signal-input monitoring
Command @SDT, ch_1, time_1 (, ch_2, time_2
format
Return value @SDT, ch_1, time_1 (, ch_2, time_2
format
Parameter ch_1-5 : Input channel
time_1-5 : Monitoring time
Example Send
Receive
Related info. 8.5.1 No-signal input monitoring
@GDT Set no-signal-input monitoring
@GDT
Command
format
@GDT, in_1, in_2, in_3, in_4, in_5
Return value
format
Parameter in_1-5 : Monitoring time of each input channel
Example Send
Receive
Related info. 8.5.1 No-signal input monitoring
@SHE Set HDCP input enabled/disabled
Command @SHE, ch_1, hdcp_1 (, ch_2, hdcp_2
format
Return value @SHE, ch_1, hdcp_1 (, ch_2, hdcp_2
format
Parameter ch_1-5 : Input channel
hdcp_1-5 : Enable/disable HDCP input
Example Send
Receive
Related info. 8.5.2 HDCP input enabled/disabled
0 = All digital inputs, 1 = IN1 to 5 = IN5
0 = OFF, 2000 = 2 seconds to 15000 = 15 seconds [Default] 10000 = 10
seconds
Set the value by 100 ms. If you set a value other than 0 for the lower 2 digits,
these values will be rounded down.
(For example, if you set it to 2955, the monitoring time is set to 2900ms.)
@SDT,3,6000
@SDT,3,6000
0 = OFF, 2000 = 2 seconds to 15000 = 15 seconds [Default]: 10000 = 10
seconds
@GDT
@GDT,6000,10000,
10000,4000,4000
0 = All digital inputs, 1 = IN1 to 5 = IN5
0 = DISABLE, 1 = ENABLE [Default]
@SHE,1,0
@SHE,1,0
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
Set monitoring time of IN3 to 6000 ms (6 seconds).
Terminated normally.
Get monitoring time of input video signals.
IN1: 6000ms (6 seconds), IN2 and IN3:
10000ms (10 seconds), IN4 and IN5: 4000ms
(4 seconds).
･･･
)
･･･
)
Disable HDCP input to IN1.
Terminated normally.
44