IDK MSD-804FD Series Command Manual page 52

@GDM Get output mode
Command @GDM
format
Return value @GDM, out_1 (, out_2 , out_3 , out_4)
format
Parameter out_1-4 : Output mode of each output
0 = DVI MODE, 1 = HDMI RGB MODE, 2 = HDMI YCbCr4:2:2 MODE,
3 = HDMI YCbCr4:4:4 MODE [Default]
Example Send
Receive
Related info. 8.7.2 Output mode
@SUY Set synchronous signal output with no input video
Command @SUY, ch_1, sync_1 (, ch_2, sync_2
format
Return value @SUY, ch_1, sync_1 (, ch_2, sync_2
format
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
sync_1-4 : Output of synchronous idle
0 = Not output, 1 = Output [Default]
Example Send
Receive
Related info. 8.7.3 Synchronous signal output with no input video
@GUY Get synchronous signal output with no input video
@GUY
Command
format
Return value @GUY, out_1 (, out_2 , out_3 , out_4 )
format
Parameter out_1-4 : Output of synchronous idle of each output
0 = Not output, 1 = Output [Default]
Example Send
Receive
Related info. 8.7.3 Synchronous signal output with no input video
Get output mode.
@GDM
OUT2: DVI MODE;
@GDM,3,0,3,3
other outputs: HDMI YCbCr4:4:4 MODE。
@SUY,1,1 OUT1 outputs synchronous idle even if video signals
are not input.
@SUY,1,1 Terminated normally.
@GUY Get synchronous idle output if no input video
signals.
@GUY,1,1,0,1 OUT3 does not output synchronous signal but the
other outputs do.
52
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)