Lan Port - IDK MSD-804FD Series Command Manual

3.3.12 LAN port

@SIP Set IP address
@SIP, unit_1, unit_2, unit_3, unit_4
Command
format
Return value @SIP, unit_1, unit_2, unit_3, unit_4
format
Parameter unit_1 : Upper bit of the IP address to unit_4 : Lower bit of the IP address
Example Send
Receive
Related info. 8.11.1 IP address
Note After IP address or serial communication setting is changed, communication may
be disabled. Change environmental settings based on the settings of the MSD.
@GIP Get IP address
Command @GIP
format
Return value @GIP, unit_1, unit_2, unit_3, unit_4
format
Parameter unit_1 : Upper bit of the IP address to unit_4 : Lower bit of the IP address
Example Send
Receive
Related info. 8.11.1 IP address
@SBI Set OUTB IP address
@SIP, unit_1, unit_2, unit_3, unit_4
Command
format
Return value @SIP, unit_1, unit_2, unit_3, unit_4
format
Parameter unit_1 : Upper bit of the IP address to unit_4 : Lower bit of the IP address
Can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
Related info. 8.11.1 IP address
Note After IP address or serial communication setting is changed, communication may
be disabled. Change environmental settings based on the settings of the MSD.
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.199
@SIP,192,168,3,2
@SIP,192,168,3,2
0 to 255 = 8 bit (Decimal notation) [Default] 192.168.001.199
@GIP
@GIP,192,168,3,2
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.200
@SIP,192,168,3,2
@SIP,192,168,3,2
MSD-804FD Users Guide (Command Guide)
Set IP address of the MSD-804FD to
"192.168.3.2".
Terminated normally.
Get IP address of MSD-804FD.
IP address is "192.168.3.2".
Set IP address of OUTB to "192.168.3.2".
Terminated normally.
79