IDK MSD-804FD Series Command Manual page 67

@GDO Get audio output connector
Command @GDO
format
Return value @GDO, out_1 (, out_2, out_3, out_4)
format
Parameter out_1-4 : Audio output connector of each output
0 = ANALOG,
1 = DIGITAL (HDMI only),
2 = ANALOG&DIGITAL (HDMI) [Default]
Example Send
Receive
Related info. 8.8.8 Output connector
@SAO Set digital audio output connector
Command @SAO, ch_1, outA_1, (, ch_2, out_2
format
Return value @SAO, ch_1, outA_1, (, ch_2, out_2
format
Parameter ch_1-8 : Output
0 = All outputs, 1 = OUT1A to 4 = OUT4A, 5 = OUT1B to 8 = OUT4B*
outA_1-4 : Each digital audio output connector of OUTA
outB_1-4 : Each digital audio output connector of OUTB
0 = Not output, 1 = Output [Default]
Example Send
Receive
Send
Receive
Related info. 8.8.9 Digital audio output connector
@GAO Get digital audio output connector
Command @GAO
format
Return value @GAO, out_1 (, out_2, out_3, out_4)
format
Parameter outA_1-4 : Each digital audio output connector of OUTA
outB_1-4 : Each digital audio output connector of OUTB
Example Send
Receive
Send
Receive
Related info. 8.8.9 Digital audio output connector
Get audio output connector.
@GDO
@GDO,2,2,2,0 OUT4: analog audio output connector only; other
outputs: both analog and digital
@SAO,1,0 OUT1: digital audio is not output.
Terminated normally.
@SAO,1,0
@SAO,1,0
Can be set only if Cat5e/Cat6 output option is installed.
@ERR,15
@GAO Get connector outputting digital audio.
@GAO,1,1,1,0,1,1,1,1 OUT4A: digital audio is not output; other outputs:
digital audio is output.
Can be set only if Cat5e/Cat6 output option is
@GAO
@ERR,15 installed.
67
MSD-804FD Users Guide (Command Guide)
・･･
)
･・･
)