IDK MSD-804FD Series Command Manual page 86

@SLP Set TCP port number
Command @SLP, connection_1, port_1 (, connection_2, port_2
format
Return value
@SLP, connection_1, port_1 (, connection_2, port_2
format
Parameter connection_1-8 : Connection number
0 = All connections, 1 = Connections 1 to 8 = Connection 8
port_1-8 : Port number
23, 80, 1100, 5000 to 5999, 6000 to 6999
[Default]:
Example Send
Receive
Related info. 8.11.5 TCP port number
Note After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.
@GLP Get TCP port number
Command @GLP
format
Return value @GLP, connection_1, connection_2, connection_3, connection_4, connection_5,
format
connection_6, connection_7, connection_8
Parameter connection _1-8 : Port numbers of each connections
23, 80, 1100, 5000 to 5999, 6000 to 6999
[Default]: Connections 1 to 3 = 1100, Connections 4 to 6 = 23,
Example Send
Receive
Related info. 8.11.5 TCP port number
@GMC Get MAC address
Command @GMC
format
@GMC, unit_1, unit_2, unit_3, unit_4, unit_5, unit_6
Return value
format
Parameter unit_1 : Upper bti of the MAC address to unit_6 : Lower bit of the MAC address
00 to FF = 8 bit (in hexadecimal)
Example Send
Receive
Related info. 8.11.6 Displaying MAC address
Connection 1 to 3 = 1100, Connection 4 to 6 = 23,
Connection 7 to 8 = 80
@SLP,8,6000
@SLP,8,6000
Connections 7 to 8 = 80
@GLP
@GLP,1100,1100,1100,
23,23,23,80,80
@GMC
@GMC,00,08,E5,55,00,01
86
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
Set port number of connection 8 to 6000.
Terminated normally.
Get port number.
Connections 1 to 3: 1100; connections 4 to 6:
23; connections 7 and 8: 80.
Get MAC address.
Reply MAC address.