IDK MSD-804FD Series Command Manual page 94

Example Send
Receive
Send
Receive
Related info. 8.12.1 Control commands
@SEC,3,0,8192,PO Register to control command 3 as following.
WER STATUS,9, ・Delay: 0 ms
47455420504F570D ・Output port: LAN 8
0A,2000,2,200,0,1,0 ・Memo: POWER STATUS
D
・Data size: 9 bytes
@SEC,3,0,8192,PO ・Command data : GET POWCR LF (ASCII
WER codes)
STATUS,9,47455420 ・TimeOUT2000 ms
504F570D0A,
・Retry: 2 times
2000,2,200,0,1,0D
・Interval: Resend IN200 ms retry interval
・Retryover: Stop
・Received data: Displayed with ASCII codes
・Delimiter: 0D=Hexadecimals (CR =ASCII
codes)
@SEC,4,0,128,INPU Register to control command 4 as following.
T,7, ・Delay: 0ms
494E53454C0D0A,2 ・Output port: LAN 6
500,4, ・Memo: INPUT
100,1,2,100
・Data size: 7 bytes
@SEC,4,0,128,INPU ・Command data: INSELCR LF (ASCII codes)
T,7, ・TimeOUT2500 ms
494E53454C0D0A,2 ・Retry: 4 times
500,4, ・Interval: Resend IN100ms retry interval
100,1,2,100
・Retryover: Execute
・Received data: Display with hexadecimals
・Reply command: Delimiter not monitored
94
MSD-804FD Users Guide (Command Guide)