IDK MSD-804FD Series Command Manual page 81

@GSB Get subnet mask
Command @GSB
format
@GSB, unit_1, unit_2, unit_3, unit_4
Return value
format
Parameter unit_1 : Upper bit of the subnet mask to unit_4 : Lower bit of the subnet mask
0 to 255 = 8 bit (Decimal notation) [Default]: 255.255.255.000
Example Send
Receive
Related info. 8.11.2 Subnet mask
@SBS Set OUTB subnet mask
Command @SBS, unit_1, unit_2, unit_3, unit_4
format
Return value @SBS, unit_1, unit_2, unit_3, unit_4
format
Parameter unit_1 : Upper bit of the OUTB subnet mask to unit_4 : Lower bit of the OUTB subnet
mask
0 to 255 = 8 bit (Decimal notation) [Default]: 255.255.255.000
Can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
Send
Receive
Related info. 8.11.2 Subnet mask
Note After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.
@GBS Get OUTB subnet mask
Command @GBS
format
Return value @GBS, unit_1, unit_2, unit_3, unit_4
format
Parameter unit_1 : Upper bti of the OUTB subnet mask to unit_4 : Lower bit of the OUTB subnet
mask
0 to 255 = 8 bit (Decimal notation) [Default]: 255.255.255.000
Values can be got only if Cat5e/Cat6 output option is installed.
Example Send
Receive
Related info. 8.11.2 Subnet mask
@GSB
@GSB,255,255,192,0
@SBS,255,255,192,0
@SBS,255,255,192,0
@SBS,255,0,0,128
@ERR,1
@GBS
@GBS,255,255,192,0
81
MSD-804FD Users Guide (Command Guide)
Get subnet mask.
Subnet mask: 255.255.192.0 (=18 bit).
Set OUTB subnet mask to 255.255.192.0
(=18 bit).
Terminated normally.
If you specify an invalid value for the subnet
mask, an error is replied.
Get OUTB subnet mask.
OUTB subnet mask: 255.255.192.0 (=18
bit).