IDK MSD-804FD Series Command Manual page 101

@SCC Set command link
Command @SCC, event, c_1 (, c_2, c_3
format
Return value
@SCC, event, c_1 (, c_2, c_3
format
Parameter event : Command execution condition
For set values, see Table 3.3.13 a (P. 102).
c_1-10 : Send command sequence
0 = OFF, 1 to 32 = COMMAND 1 to 32
Link commands registered in one of the following commands: @SEC Set control
command (Control communication command) (P. 89), @SEC Set control
command (Display received data) (P. 93), and @SEC Set control command
(Control CEC) (P. 97)
Example Send
Receive
Send
Receive
Related info. 8.12.3 Command link
@GCC Get command link
Command @GCC, event
format
Return value @GCC, event, c_1 (, c_2, c_3
format
Parameter event : Command execution condition
Regarding set values, please refer to Table 3.3.13 a (P. 102).
c_1-10 : Sequence of sent commands
0 = OFF, 1 to 32 = COMMAND 1 to 32
Example Send
Receive
Send
Receive
Related info. 8.12.3 Command link
･･･
)
･･･
)
@SCC,19,5,2,1 Execute commands in order of COMMAND
@SCC,19,5,2,1 5→2→ 1 at startup.
@SCC,9,10,20 Execute COMMAND E PLANE A in order of
@SCC,9,10,20
COMMAND 10→COMMAND 20.
･･･
)
@GCC,19 Get command linked to the power sequence.
@GCC,19,5, Power on with the sequence of COMMAND
2,1
5→COMMAND 2→COMMAND 1.
@GCC,9 Get commands liked with COMMAND E PLANE A.
@GCC,9,10, COMMAND E PLANE A is executed with the sequence
20 of COMMAND 10→COMMAND 20.
101
MSD-804FD Users Guide (Command Guide)