IDK MSD-804FD Series Command Manual page 60

@HAU Re-authorize HDCP
Command @HAU, ch_1, (, ch_2
format
Return value
@HAU, ch_1, (, ch_2
format
Parameter ch_1-8 : Output
0 = All outputs, 1 = OUT1A to 4 = OUT4A, 5 = OUT1B to 8 = OUT4B*
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
Related info. 8.7.13 HDCP re-authorization
@SFL Set frame lock mode
Command @SFL, framelock
format
@SFL, framelock
Return value
format
Parameter framelock: Set framelock mode.
0 = OFF [Default], 1 = ON
Example Send
Receive
Related info. 8.7.14 Frame lock mode
@GFL Get frame lock mode
Command @GFL
format
Return value @GFL, framelock
format
Parameter framelock: Set framelock mode.
0 = OFF [Default], 1 = ON
Example Send
Receive
Related info. 8.7.14 Frame lock mode
･･･
)
･･･
)
@HAU,1 Authorize HDCP of the display device connected to
OUT1A again.
@HAU,1
Terminated normally.
@SFL,1 Set frame lock mode ON.
@SFL,1 Terminated normally.
@GFL Get frame lock mode ON.
@GFL,1 Terminated normally.
60
MSD-804FD Users Guide (Command Guide)