IDK MSD-804FD Series Command Manual page 55

@GFT Get video switching speed
Command @GFT
format
Return value @GFT, out_1 (, out_2, out_3, out_4 )
format
Parameter out_1-4 : Switching speed of each output
100 = 0.1 seconds to 2000 = 2 Seconds [Default] 350 = 0.35 Seconds
Example Send
Receive
Related info. 8.7.6 Switching speed
@SWC Set wipe color
Command @SWC, ch_1, red_1, green_1, blue_1 (, ch_2, red_2, green_2, blue_2
format
Return value
@SWC, ch_1, red_1, green_1, blue_1 (, ch_2, red_2, green_2, blue_2
format
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
red_1-4
green_1-4 : Wipe color (Green)
blue_1-4
0 to 255 [Default]: 0
Example Send
Receive
Related info. 8.7.7 Wipe color
Note This command is valid only if @SFF (P. 53) is set to 3 to 6 (WIPE).
@GWC Get wipe color
Command @GWC, ch
format
Return value @GWC, ch, red, green, blue
format
Parameter ch : Output
1 = OUT1 to 4 = OUT4
: Wipe color (Red)
red
green : Wipe color (Green)
blue : Wipe color (Blue)
0 to 255 [Default]: 0
Example Send
Receive
Related info. 8.7.7 Wipe color
@GFT
@GFT,400,350,350,350
: Wipe color (Red)
: Wipe color (Blue)
@SWC,1,255,255,255
@SWC,1,255,255,255
@GWC,1
@GWC,1,255,255,255
55
MSD-804FD Users Guide (Command Guide)
Get switching speed of video input
channels.
OUT1: 400 ms; other outputs:350 ms
Set wipe color (all RGB) of OUT1 to 255
(White).
Terminated normally.
Get wipe color of OUT1.
All RGB: 255 (White)
･･･
)
･･･
)