IDK MSD-804FD Series Command Manual page 84

Receive
Send
Receive
Send
Receive
Related info. 8.11.4 Operation mode
Note After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.
@SLF,2,1,192,168,1,1,0,1300
@SLF,3,1,192,168,1,2,1,PROJE
CTOR1
@SLF,3,1,192,168,1,2,1,PROJE
CTOR1
@SLF,3,1,192,168,1,2,1
@SLF,3,1,192,168,1,2,1
84
MSD-804FD Users Guide (Command Guide)
number: 1300
Terminated normally.
Set connection 3 as follows:
Operation mode: TRANSMITTER,
Destination IP address: 192.168.1.2,
PJLink: Used, Password:
PROJECTOR1
Terminated normally.
Set connection 3 as follows:
Operation mode: TRANSMITTER,
Destination IP address: 192.168.1.2,
PJLink: Used, Password
authentication: Off
Terminated normally.