IDK MSD-804FD Series Command Manual page 115

@SPM Save all settings in preset memory
Command @SPM, preset (, name)
format
@SPM, preset (, name)
Return value
format
Parameter preset : Preset memory
1 to 8
name : Memory name
Up to 10 characters using 20 to 7D. "2 ASCII codes"
If you do not specify memory name, only each setting is saved without changing the
memory name
Example Save current settings in preset memory 2.
Send
Receive
Send
Receive
Related info. 8.13.5 Saving all setting
@SMU Set startup setting
Command format @SMU, state
Return value @SMU, state
format
Parameter state : Startup setting
Example Send
Receive
Related info. 8.13.6 Startup setting
@GMU Get startup setting
Command format @GMU
Return value @GMU, state
format
Parameter state : Startup setting
1 to 9 = Cross point memory 1 to 9, 10 = Channel OFF,
11 = Last channel [Default], 12 to 19 = Preset memory 1 to 8
Example Send
Receive
Related info. 8.13.6 Startup setting
@SPM,2
@SPM,2
@SPM,2,MEMORY2
@SPM,2,MEMORY2
1 to 9 = Cross point memory 1 to 9, 10 = Channel OFF,
11 = Last channel [Default], 12 to 19 = Preset memory 1 to 8
@SMU,3 Set startup channel setting to cross point memory 3.
@SMU,3 Terminated normally.
@GMU
Get startup status.
@GMU,3 Channel setting saved in cross point memory 3 is
applied at start up.
115
MSD-804FD Users Guide (Command Guide)
Not specify memory name
Specify memory name