IDK MSD-804FD Series Command Manual page 64

@SIL Set relative value of audio input level
Command @SIL, ch_1, updown_1 (, ch_2, updown_2
format
Return value
@SIL, ch_1, updown_1 (, ch_2, updown_2
format
Parameter ch_1-9 : Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
updown_1-9 : Set relative value
-60 to +60
The specified value is added to the current audio input level. If the total value
exceeds the limit value (-60 to +0), the limit value will be applied.
Example Send
Receive
Related info. 8.8.4 Input level
@GIL Get limit status of audio input level
@GIL
Command
format
Return value @GIL, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8, in_9
format
Parameter in_1-9 : Limits of audio input level of each input channel
-1 = Min. set value (-60 dB), 0 = Not limited, 1 = Max. set value (±0 dB)
Example Send
Receive
Related info. 8.8.4 Input level
@SLO Set output lip sync
Command @SLO, ch_1, frame_1 (, ch_2, frame_2
format
Return value @SLO, ch_1, frame_1 (, ch_2, frame_2
format
Parameter ch_1-4 : Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
frame_1-4 : Lip Sync
0 to 8 [Default]: 0
Example Send
Receive
Related info. 8.8.5 Output lip sync
@SIL,1,-1
Lower audio input level (1 dB) of OUT1.
@SIL,1,-1 Terminated normally.
@GIL
@GIL,1,0,0,0,0,0,0,0,0
@SLO,4,2 Set lip sync of OUT4 to 2 frames.
@SLO,4,2
Terminated normally.
64
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
Get limits of input offset.
IN1: Max. value; other inputs: Not limited.
･･･
)
･･･
)