IDK MSD-804FD Series Command Manual page 104

@GUP Get execution plane at starting up
Command @GUP, event_1 (, event_2
format
Return value
@GUP, event_1, plane_1 (,event_2, plane_2
format
Parameter event_1-9 : Command execution condition
1 = COMMAND A to 9 = COMMAND I
plane_1-9 : Execution plane at start-up
0 = AUTO, 1 = PLANE A, 2 = PLANE B
Example Send
Receive
Related info. 8.12.3 Command link
@SIT Set ineffective time during control command
Command @SIT, time
format
Return value @SIT, time
format
Parameter time : Invalid time
0 to 999999 [Default]: 0
Example Send
Receive
Related info. 8.12.5 Ineffective time
@GIT Get ineffective time during control command
Command @GIT
format
Return value @GIT, time
format
Parameter time : Ineffective time
0 to 999999 [Default]: 0
Example Send
Receive
Related info. 8.12.5 Ineffective time
･･･
)
@GUP,1 Get execution plane of COMMAND A at start-up.
@GUP,1,1
COMMAND A executes PLANE A at start-up.
@SIT,2000 Set invalid time of the command to 2000 ms (2
@SIT,2000 Seconds).
Terminated normally.
@GIT Get ineffective time at command execution.
@GIT,2000 Ineffective when command is being executed or until
2000 ms (2 Seconds) passes after the command
starts.
104
MSD-804FD Users Guide (Command Guide)
･･･
)